Skip to main content

1.0

Major VersionM

by Joshua

Introduction

This technique allow you to operate a Crazy Circuits Slide Switch with a simple LEGO based mechanism.

Video Overview

  1. Gather your parts up.
    • Gather your parts up.

    • These are the basic parts needed for this technique, but you'll also need something to put it on.

  2. Connect the #2 Axel Connector to the Vertical Pin. Connect the Perpendicular Axel to one end. Connect the Perpendicular Axel to one end.
    • Connect the #2 Axel Connector to the Vertical Pin.

    • Connect the Perpendicular Axel to one end.

  3. Plug your Axle into the other side. Attach a Technicals Ball for added ease of use.
    • Plug your Axle into the other side.

    • Attach a Technicals Ball for added ease of use.

  4. Attach the Perpendicular Connector to the top of your switch. You'll need to put the Vertical Pin on top of a LEGO plate to get spacing correct with the Switch.
    • Attach the Perpendicular Connector to the top of your switch.

    • You'll need to put the Vertical Pin on top of a LEGO plate to get spacing correct with the Switch.

    • You can use longer Axle pieces to extend this technique further.

Finish Line

Joshua

Member since: 11/16/2017

8,400 Reputation

129 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 2

Past 7 Days: 3

Past 30 Days: 20

All Time: 93