Skip to main content

1.0

Minor Versionm

by Pete Prodoehl

Introduction

A 3D Printed LEGO Compatible mount for a Thumbstick Sensor.

Tools

Parts

No parts specified.

  1. You can download the file and print it on your own 3D Printer.
  2. The Thumbstick Sensor slides into the holder and is held in place by friction. If the fit is a bit too tight you can file or sand the inside holding arms of the print.
    • The Thumbstick Sensor slides into the holder and is held in place by friction. If the fit is a bit too tight you can file or sand the inside holding arms of the print.

Finish Line

One other person completed this guide.

Pete Prodoehl

Member since: 03/04/2020

131 Reputation

130 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 6

All Time: 21