Skip to main content

1.6

Major VersionM

by Joshua

Introduction

Create a cardboard knife switch with this template and conductive Maker Tape.

Video Overview

Featured Document

  1. Print the last page of the PDF document and glue the template to a piece of cardboard. Print the last page of the PDF document and glue the template to a piece of cardboard.
    • Print the last page of the PDF document and glue the template to a piece of cardboard.

  2. Attach Maker Tape as shown. Attach Maker Tape as shown.
    • Attach Maker Tape as shown.

  3. Assemble switch as shown. Use three brass fasteners to hold the switch together. Use three brass fasteners to hold the switch together.
    • Assemble switch as shown.

    • Use three brass fasteners to hold the switch together.

  4. Connect your circuit to the pieces of Maker Tape on the left and right side of the base. When you close the switch your circuit will be completed and will turn on! When you close the switch your circuit will be completed and will turn on!
    • Connect your circuit to the pieces of Maker Tape on the left and right side of the base.

    • When you close the switch your circuit will be completed and will turn on!

Finish Line

Attached Documents

Pete Prodoehl

Member since: 03/04/2020

1 Reputation

43 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 4

Past 30 Days: 26

All Time: 69