Skip to main content

1.01

Minor Versionm

by Joshua

Video Overview

Featured Document

  1. Gather Supplies Cut each shape out with room around the edge Staple the shape to the foam outside the shape to hold it in place.
    • Gather Supplies

    • Cut each shape out with room around the edge

    • Staple the shape to the foam outside the shape to hold it in place.

  2. Cut out the rest of the shapes using the same method. Cut out the rest of the shapes using the same method. Cut out the rest of the shapes using the same method.
    • Cut out the rest of the shapes using the same method.

  3. Glue the shapes together. Glue the shapes together. Glue the shapes together.
    • Glue the shapes together.

  4. Trim away any excess foam visible around the edges by holding your cutter at an angle. Trim away any excess foam visible around the edges by holding your cutter at an angle.
    • Trim away any excess foam visible around the edges by holding your cutter at an angle.

  5. Choose two LEDs to be the glow of the eyes. Poke the legs through the foam at the desired location. Tip: It's best to position the shorter, negative wire from your LED to face the outer edge of the eyes.
    • Choose two LEDs to be the glow of the eyes.

    • Poke the legs through the foam at the desired location.

    • Tip: It's best to position the shorter, negative wire from your LED to face the outer edge of the eyes.

  6. Insert the battery between the two legs. Make sure the long leg touches the "+" side of the battery and the short wire touches the "-". You should have a light! (If you don't, flip the battery over) Once you have a lit up LED, wrap a long piece of tape horizontally around the battery and legs to hold them together.
    • Insert the battery between the two legs. Make sure the long leg touches the "+" side of the battery and the short wire touches the "-".

    • You should have a light! (If you don't, flip the battery over)

    • Once you have a lit up LED, wrap a long piece of tape horizontally around the battery and legs to hold them together.

  7. When the tape is secure, hold the LED in one hand and use the other hand to bend the battery flat against the back, with the positive side facing up and the negative side facing the foam. Repeat LED steps to complete the other eye. If you'd like, repeat these steps with another design from the template to make a bunch of spooky eyes!
    • When the tape is secure, hold the LED in one hand and use the other hand to bend the battery flat against the back, with the positive side facing up and the negative side facing the foam.

    • Repeat LED steps to complete the other eye.

    • If you'd like, repeat these steps with another design from the template to make a bunch of spooky eyes!

  8. Pumpkins are great, but we had even more fun making other objects come to life with spooky eyes! Here are some examples. Pumpkins are great, but we had even more fun making other objects come to life with spooky eyes! Here are some examples. Pumpkins are great, but we had even more fun making other objects come to life with spooky eyes! Here are some examples.
    • Pumpkins are great, but we had even more fun making other objects come to life with spooky eyes! Here are some examples.

  9. Here are some more examples. Have fun making your house spooky for your next halloween party! Have fun making your house spooky for your next halloween party!
    • Here are some more examples.

    • Have fun making your house spooky for your next halloween party!

Finish Line

Attached Documents

Natasha Dzurny

Member since: 08/26/2019

1,861 Reputation

12 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 1

All Time: 28