Skip to main content

1.1

Major VersionM

by Pete Prodoehl

Introduction

A 3D Printed LEGO Compatible mount for an OLED Display.

Tools

Parts

No parts specified.

  1. You can download the file and print it on your own 3D Printer.
  2. The OLED Display is placed into the holder by putting the bottom half into the bottom holder arms and then gently pressing the top into the top holding arms.
    • The OLED Display is placed into the holder by putting the bottom half into the bottom holder arms and then gently pressing the top into the top holding arms.

    • Caution: The OLED display is fragile. Do not press down on the screen. It is recommended to place the 3D printed holder onto the LEGO surface before you insert the display.

    • Note: We've left space beneath the display so that you can solder right angle header pins to the PCB.

Finish Line

One other person completed this guide.

Pete Prodoehl

Member since: 03/04/2020

131 Reputation

130 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 6

All Time: 32