Introduction
Use our Robotics Board to control a servo motor with a thumbstick.
Video Overview
Featured Document
-
-
Build the circuit as shown in the diagram using the components specified.
-
The servo motor has wires already attached. Make note of where each color plugs in.
-
You can use any color jumper wires for the thumbstick, just make sure they are plugged into the right place.
-
-
-
Upload the Arduino sketch to the Robotics Board.
-
You can find the code here: https://github.com/BrownDogGadgets/Progr...
-
Cancel: I did not complete this guide.
One other person completed this guide.
Attached Documents
