Introduction
Use our Robotics Board to control an LED with a pushbutton.
Video Overview
Featured Document
-
-
Build the circuit as shown in the diagram using the components specified.
-
-
-
Upload the Arduino sketch to the Robotics Board.
-
You can find the code here: https://github.com/BrownDogGadgets/Progr...
-
If you have not previously uploaded code to the Robotics Board, review the Robotics Board Setup and Use guide.
-
Almost done!
Finish Line
Cancel: I did not complete this guide.
One other person completed this guide.
Attached Documents
